8000pa Centrifugal Blower Fan High Pressure Centrifugal Fan Cement Kiln Us

Cement Kiln Industry Centrifugal Blower Fan SKF Bearing High Pressure 8000pa

The Model 9-19 and 9-26 high-pressure centrifugal fan is extensively applied to transmit materials. The transmission medium is air or other non-flammable gases, which are harmless to human. The medium does not contain any adhesive materials. The gas temperature is ≤80℃,and the dust and particle volume are ≤150mg/m3. It is generally suitable for enforced high pressure ventilation in such
industries as forging and smelting, glass, pottery, electroplating, battery and wireless sectors, etc. It is also used to deliver grain, fodder, ore powder, plastics, etc. in the processing industries. It is also suitable for the combined use with carton machinery and tempered glass equipment.

Wide Performance Range of High Efficiency
The wheel has stable and flat performance curves over a wide range of operating conditions which can efficiently avoid performance drop as the operating point moves up or down.
Non-overloading
There exists a maximum shaft power for the motor. When the motor is selected based on the maximum shaft power, motor power and motor service factor, the shaft power can never exceed the rated motor power as the fan runs within the operating range. The user can be rest assured in this respect.
Fan Type
The fan shall be of the single-inlet centrifugal type with the backward curved steel wheel. The drive types shall be direct, coupling or belt.

Quality Assurance
1.Strictly conforming to ISO9001-2000 quality management system.
2.Strict control from purchasing inspection,process inspection to final proofing;
3.Establish several QC departments to execute quality control regulations;
4.Detailed quality control examples;
1)Complete files for quality control and quality feedback.
2)Strict inspection for the components of our grinding mills,to assure products free of damage and avoid rust-eaten and paint peeling off later on.
3)Only qualified components will be assembled and total equipment must be inspected completely before sales.After sales service
1.We will send our technician to the site for guiding equipment installation and commissioning
2.During the installation and commissioning,we offer operator training service
3.The quality assurance date is one year after commissioning,and after that, we will collect the cost if provide repairing for your equipment.
4.Maintenance for equipment failure caused by improper handling(appropriate cost will be collected).
5.We offer the components with favorable price and perdurable maintenance.

6.If equipment repairing is needed after quality assurance date is expired,we will collect maintenance cost.

Centrifugal fan production process:

Case Show: